Polytex XI High Build Glass-Like Finish

SKU:
PTXXI-10G

Description:
Polytex X1 is a two component, 100% solids, high-build epoxy coating.

Uses:
Polytex XI is used for coating picture plaques, wood, photographs, plaster, and craftwork. It can also be used for magazine and newspaper clippings, ceramic statues, general coatings, tabletops and bar tops.

Contact us at 800-858-5990 for pricing

Brookfield viscosity, cps, 25 °C:
7,100
Gel Time, minutes (200-g mass @ 25°C):
45 min
Peak Exothermic temperature, °C:
150
Pot Life (200-g mass @ 25°C):
30 min
Drying Time, 20 mil film:
8 hr
Thru Drying Time, 20 mil film:
12 hr
Izod impact strength, ft-lb/in:
0.95
Shore D hardness:
81-83
Tensile Strength, psi:
6,100
Ultimate elongation, %:
5
Flexural strength, psi:
310,000
Flexural modulus, psi:
3,500
Compressive strength², psi, at yield:
27,600
Compressive strength², psi, at failure:
45.5 mg loss

Related Products