POLYTEX 13

SKU:
PTX13

Two Component, 100% solids, high-build epoxy coating.

Used for used for coating picture plaques, wood, photographs, plaster, and craftwork. It can also be used for magazine and newspaper clippings, ceramic statues, general coatings, tabletops and bar tops.

One Gallon kit will cover approximately 20-30 square feet per coat.

Polytex 13 is also available with a UV additive to minimize yellowing.

Contact us at 800-858-5990 for pricing

Resin Density at 25°C, lbs/gal:
9.6
Hardener Density at 25°C, lbs/gal:
8.1
Resin Viscosity at 25°C, cP:
5,300
Hardener Viscosity at 25°C, cP:
2,100
Mix Ratio by Weight:
100A : 85B
Mix Ratio by Volume:
1A : 1B
Initial Mixed Viscosity 25°C, cP:
3,400
Gel Time at 25°C, 150g mass, min.:
52
Thin Film Set Time at 25°C, 8 mil, hours:
4-5
Minimum Recommended Temp, °F:
60
Full Cure at 25°C, days:
5-7
Color:
Clear
Izod Impact, Notched, ft-lb/in:
0.60
Tensile Strength, psi:
6,330
Tensile Modulus, psi:
366,000
Tensile Elongation, %:
5.7
HDT, Room Temp Cure, °F:
112
HDT, Post Cure, °F:
117
Compressive Strength, psi:
8,600
Compressive Modulus, psi:
275,000
Flexural Strength, psi:
8,400
Flexural Modulus, psi:
282,000
Cured Density, g/cm3 (lbs/in3):
1.10 (0.040)
Volumetric Yield, in3/lb:
25.2
Volumetric Shrinkage, %:
3.1
Hardness, Room Temp Cure, Shore D:
81
Hardness, Post Cure, Shore D:
78
Tg by DSC, °F:
105
Tabor Abrasion:
17.0

Related Products