LIQUID ILLUSION CLEAR FLORAL SETTING RESIN
Add the appearance of pure natural, sparkling water to your silk flower arrangements –
Simply Mix and Pour
Mega-Pour - Good for pours 48-64oz
See RESOURCES section below for use instructions.
MIXING INSTRUCTIONS
Clean inside walls of vase with a glass cleaner. Measure and Pour: If using the LIQUID ILLUSION 8 oz. kit, you may pour the full contents of each bottle into the tray provided. Mixtures of less than 8 oz. may not cure properly. If you are using less than a complete kit (16 oz. or above) or mixing a large volume, measure out equal parts of Resin (Part A) and Hardener (Part B) and pour together. Unequal measurement will cause the product to not cure properly. Always mix in clean plastic cup, a glass container or bucket (no Styrofoam). Stir mixed product gently for approximately 2 minutes or until clear. Bubbles will disappear as mixture sets. Sides and the bottom of container must be scraped for thorough mixing with a non-metal stirring stick. If compound is not completely mixed, it will not cure evenly. Pour Liquid Illusion into vase being careful not to splash on the vase walls. If you choose to use decorative stones or marbles in your arrangement, make sure these items are clean before putting into your vase. When pouring over stones or marbles, first add just enough mixture to cover these items. Mix the stones or marbles gently into the mixture to completely wet their surfaces. This will help prevent air voids between touching surfaces and help insure maximum adhesion and product integrity. After that, add the desired amount of Liquid Illusion for your vase. Leave finished vase arrangement on a level surface for at least 36 hours at 70º-85ºF. Cooler temperatures will cause material to cure slower. Do not move or touch until set.
